Pond or pool water containing unwanted contaminates enters the EP unit's wet chamber and is exposed to the light rays generated by the UV bulb. The EP unit has been designed to allow for some turbidity in the water, as turbidity will reduce the UV light wave transmission capability. Therefore, all EP units are sized for a minimum two second exposure time to allow for possible turbidity in the water and the reduction in the killing power of the UV bulb when it nears the end of its useful life. When the incoming water is exposed for this duration, the water exiting the unit is near drinking water biological quality.
CAUTION!: THIS UNIT IS FOR POND OR POOL USE ONLY. DO NOT USE THIS UNIT FOR POTABLE (DRINKING) WATER SANITIZATION.
- Stainless Steel Housing
- Stainless Steel Quartz Seal Sleeve
- Plastic Electrical Enclosure
- Aquatemp Limited Warranty - Unit and Ballast -5Years, Bulb-1Year (9000 Hours)
Flow Rate (GPM)
2hr Turn Over
3hr Turn Over
4hr Turn Over
|EP-5||1.47||44||5280 gal||7920 gal||1056 gal|
|EP-10||2.77||83||9960 gal||14940 gal||19920 gal|
|EP-20||3.95||118||14160 gal||21240 gal||28320 gal|
|EP-40||5.18||172||20640 gal||30960 gal||41280 gal|